How to install an electric retractable door?

How to install the electric retractable door we bought? Generally, there are two methods. One is that the after-sales service is in place, and we will help you install it in place at one time. This method is fast, convenient and efficient. The other is to install it by looking at the manual. It is definitely time-consuming and labor-intensive to install it by yourself. Therefore, the editor recommends that the electric retractable door is better for after-sales installation. But we still need to understand how the electric retractable door is installed, so that we can prepare for the installation of the electric retractable door.

The installation of electric retractable doors can be divided into six steps: embedded track-fixed door body-limit switch-fixed control box-connection line-debugging.

1. Embedded track

2. Fix the door body: Put the door body into the track, and fix the bottom support at its tail with special fixing card and anchor expansion screw (M12×80).

3. Limit switch: Set the opening and closing positions of the door and embed limit devices.

4. Fixed control box: The control box can be installed in the head box or moved to a room within 10 meters from the host for fixing.

5. Connecting the wiring: Connect the corresponding wiring strictly in accordance with the wiring diagram (the operation must be performed in the case of power failure), the wiring must be firm, there should be no short circuit between the terminals, and the wiring must be checked for correctness .

6. Debugging: First, manually push and pull the door body manually, and then check whether the door body is operating normally, and the power can be switched on only when the door body is operating normally. Follow the steps below to test the power supply, limit the position, and adjust the number of running tests.